When the engine is cold, fuel and water from the exhaust gas may condense in the intake system and in the cylinders making its way into...

Q50/Q60 HEAT EXCHANGER The VR30 uses A2W (air-to-water intercoolers). A2W intercoolers require the use of a heat exchanger(HX) and...

YOUR BASEMAP WILL NOT BE SENT UNTIL EVERY SINGLE STEP ON THIS PAGE HAS BEEN COMPLETE!! 1. DOWNLOAD THE ECUTEK CONNECT APP. 2. INSTALL THE ECUTEK BLUETOOTH CONNECT MODULE INTO THE OBD2 PORT UNDER YOUR STEERING WHEEL TO THE LEFT(OR RIGHT) ON THE Q50/Q60/Z. 3. WITH YOUR KEY ON/ENGINE OFF, OPEN THE ECUTEK APP AND GO TO THE SETTINGS BY CLICKING THE GEAR ICON AT THE BOTTOM. ONCE YOU ARE IN THE SETTINGS TAB, YOU WILL ADD THE BLUETOOTH CONNECT DEVICE BY SELECTING ADD/REMOVE. YOU