(This is to be done AFTER the "ECUTEK PHONE FLASH INITIAL SETUP") NOTE: It is REQUIRED that you connect a battery charger (not jump pack) to your vehicles battery for the first ECU reprogram. If your battery is weak and the voltage drops during programing, your ECU will get stuck in a recovery mode making your car inoperable until you put a battery charger on it and recover the ECU using the "stock" file included with your tune. You will not be able to complete this recove

DO NOT BEAT ON THE CAR UNTIL YOU HAVE THE FINAL PUMP GAS MAP. DOING SO ON A REVISION CAN POTENTIALLY HARM THE ENGINE AS IT HAS TO BE DATA LOGGED AND CHECKED FIRST! Once this step is complete, and while waiting for the next set of instructions, the car can , With the BASEMAP installed, we are ready to start the actual tuning process. The BASEMAP is a safe, proven, and tested custom built starting point that we design based on all of your modification and is used on other sim

The top datalog has correct oil pressure while the bottom log shows a solenoid stuck open causing low oil pressure. The red arrow points...